- Ideal for 1500 - 3000 sqr. ft. homes
- Fan Size: 20" diameter blade
- Panel Wattage: 30Watts
- CFM: 2400 plus
- Dimension: 29(L)in x 29(W)in x 12.5(H)in
- Actual Weight: 33 lbs
The Multi Purpose Solar Cooler Fan is state of the art, high-powered solar module which combines: Certifications, Extensive Design and testing by Engineers, and new solar technology into an all-new industry leading Solar Attic Fan.
The newly designed co-polymer UV resistant shroud is designed specifically for our application. It increases airflow and isolates the solar module from heat transfer, unlike metal. It will not rust, corrode, or dent.
The Multi Purpose Solar Cooler Fan provides optimum airflow and whisper-quiet operation. You won't even know it's running — but your energy bills will know the difference
PHOTOVOLTAIC MODULE
- Hi-Powered configuration custom engineered exclusively for the Fan-Attic application.
- Module sealed to the top side of a 24" diameter
ABS UV protected shroud cover using Vulkem 116 Polyurethane Sealant.
- 35 Multi/Monocrystaline Solar Cells
- Manufactured to ISO 9001 standards
OUTPUT CABLE :
- Two(2)-18awg. lead wires from the junction box on the underside of the PV module are routed down the outer side through a rubber grommet to the inside of the lower section.
- 1/8th-inch nylon tie wraps secure wires to the W Brackets and attach to the positive and negative motor terminals by two(2)- .25-inch female wire connectors.
SUBSTRATE:
OVERLAY:
- Encapsulation between hi-transmission tempered glass and the EVA "TPT-TP" guarantees the solar module excellent durability under harsh outdoor conditions.
- Manufactured to DIN / EN ISO 2001 2000 and ISO 9001 2000 and ISO ITSI 6949 / 2002.
- Certification by TÜV, Rheinland.
Shroud Cover:
- UV stabilized unbreakable hi-tech vacuum formed co-polymer composite
- Resists dents, deformation, rust, corrosion, and heat transfer
Brackets:
- Shroud support comes from four(4)ga. Cover Brackets and fastened by four(4) #10 x 3/4" self-tapping screws to the shroud
- 16ga. Corrosion Resistant Steel
Roof Flashing/Base:
- 24" square horizontal section of 26ga. Zincalume alloy-coated steel.
Steel :
- The top edge of the vertical base houses a galvanized mesh screen.
- 225 galvanized mesh wire Fan Motor/Blade Assembly:
- 38 Volt DC Type Motor and one(1) piece triple blade are held by two(2)-W Brackets.
Sonnetek Solar Attic fan Warranty : PDF File
Please Call For more Information
or contact sales@sonnetek.com
|
